| |

Best Welding Tips and Tricks: Welding Goggles

Welding Goggles: Why?

Welding goggles provide significant protection for the eye, while certain types of welding and cutting are being performed. These goggles are designed to protect the eyes not only from welding that produces heat and optical radiation or ultraviolet radiation but also from fragments or flares. Whatever the size of the job is, you must and have to wear protective gear when working with welding. The welding goggles must be worn on every single welding project and are crucial as ultraviolet and infrared wavelengths cannot be seen and can cause harm and injury to your eyes without you realizing. Along with the other essential protection, it is vital to prioritize eye protection as well. 

Welding Goggles: What?

Welding goggles typically come with shade five filter glass & polycarbonate chipping lenses. Welding goggle lenses are designed with shade number three or five. During cutting, brazing, and torch soldering, these shades are useful but not intended for arc welding, which requires a darker set of lenses. Choosing the right welding goggle and lens is critical for a particular operation. Each specific cutting or welding task has its own optical filters that will be suited and safe for it. For example, a filter shade that is recommended for gas welding is not adequate for arc welding. Most people falsely believe that the lens shade number corresponds to the amount of protection provided to the eyes, and therefore, the higher the number, the better the safety. All well-constructed and good quality welding goggle lenses can filter out 100% of the harmful wavelengths of ultraviolet and infrared and provides eye protection. The shade number of the lens signifies the level of darkness that the lens offers and should be used as a guide to choosing the one that is the most compatible and provides excellent visibility for the project. 

Welding Goggles or Welding Helmet?

The welding helmet may look like a full protective wall for the eyes, which in some ways, it is as you are shielded from flares, light pollution, and other similar hazards of welding. However, what the majority of welders don’t consider when welding is that there are other environmental hazards and are still exposed to potential risks that can cause eye damage, despite the helmet being worn properly. The risk of this occurring is precepted as small; however, it is a common injury that happens in the workplace. Some examples of eye injuries that may occur while wearing a welding helmet include mechanical damage inside the helmet, radiation damage that was not blocked by the welding helmet, and chemical burns that entered from underneath the welding helmet. Thus, it is essential to wear welding goggles at all times, even when you are wearing the welding helmet as well. See also Features To Consider In Auto-darkening Welding Helmets.

How to use Welding Goggles

There are also recommended and best safety considerations of the welding goggles that should be practiced. Before each usage, welders must evaluate their eye protection. Scratched lenses should be instantly replaced with new ones to prevent not being able to see clearly. Safety glasses can quickly shatter if the lenses are scratched or cracked. Welding goggles should also replace when the goggle straps are stretched out or when you begin to see some damage on the straps for extra security on your face and peace of mind that the goggles won’t slip while you are welding. It is necessary to wear face shields and welding helmets with the welding goggles or side shield safety glasses as they are considered the secondary type of eye protection and because having one kind of eye protection is not enough. If you do not use side shields safety glasses with the welding goggles, for example, your face is still at considerable risk of harm and is still exposed to the ultraviolet rays. To prevent fogging of the lenses of the welding goggles as much as possible, the lenses should be vented. Filtered plates stop harmful radiation on most protective eyewear, such as infrared light or ultraviolet, which can be damaging to the eyes and may result in blindness. To control the amount and type of light that meets the eye, it is critical to select the correct filter shade, as mentioned previously.  It is recommended to start with a shade that is too dark to see and then progressively find a lighter shade that gives enough view without going under the minimum number of shades needed for welding.

These welding tips and tricks have been brought to you by WeldingMachineReview.com – your Welding Shop and Reference Guide on Welding Machines and Welding Helmets. Weld it stronger, make it better!

Similar Posts